6 min video with captions · one-page job aid · short quiz
Job aid
Process, customer, value, waste
Process: a series of steps that turns inputs into outputs for a customer. Customer: whoever receives the output, inside the organization or outside it. Value: what the customer would willingly pay for. Waste: anything else that uses time, effort or money.
Is this activity…
Ask
Then
Value-adding
Does the customer care? Does it change the product or service? Is it right first time?
Protect it
Waste
No to any of those, and nothing requires it
Remove it
Required
No value to the customer, but safety or regulation demands it
Keep it; make it easier
SIPOC:Suppliers → Inputs → Process (5–7 high-level steps) → Outputs → Customers. Fill in C first, then work backwards.
Lean
Six Sigma
Asks
Why is this slow?
Why is this different every time?
Works on
Flow: removing waste
Variation: using data to cut defects
Watch out for: calling required steps waste · listing steps before naming the customer · treating Lean and Six Sigma as rivals (most teams use both).
Examples
Industry
Example
✈ Airline MRO
Hangar check. Customer: airline operations. Lean removes walks to stores; Six Sigma cuts the 6% of task cards returned for missing entries. Duplicate flight-control inspection: required.
✚ Healthcare
Knee procedure. Customer: patient, family, GP. Lean cuts the 2 h pre-op wait; Six Sigma cuts the 4% of procedures cancelled for a missing test. Consent: required.
🏦 Banking/Services
Account opening. Customer: the applicant. Lean removes re-keying; Six Sigma cuts the 8% of applications failing ID matching. KYC check: required.
⚙ Manufacturing
Bracket line. Customer: an equipment assembler. Lean shortens the 9-day wait before paint; Six Sigma cuts the bend-angle variation behind 3% rework.
All examples are fictional.
Quiz
Answer each question first; the answer and why open after you choose or press “Show the answer”. Nothing is saved or sent.
Pass mark: 4 of 5 questions. Q1 counts as correct at 8 of 10 items; Q5 is marked with the rubric.
Q1 · Airline MRO · Sort ten activities
Scenario: A fictional regional hangar is running a scheduled A-check. The customer is the airline's operations control, which needs the aircraft back on time and airworthy.
Question: Mark each activity V (value-adding), W (waste) or R (required: no direct value, but safety or regulation demands it). You need 8 of 10 correct.
#
Activity
Your answer
1
Inspecting a landing gear
2
Replacing a worn brake
3
Walking to stores for a seal
4
Waiting for an engineer's sign-off
5
Re-printing a lost task card
6
Duplicate inspection of the flight controls
7
Moving the aircraft between bays
8
Searching for a torque wrench
9
Lubricating hinges
10
Entering the same data in two systems
Answers:
#
Activity
Answer
1
Inspecting a landing gear
V
2
Replacing a worn brake
V
3
Walking to stores for a seal
W
4
Waiting for an engineer's sign-off
W
5
Re-printing a lost task card
W
6
Duplicate inspection of the flight controls
R
7
Moving the aircraft between bays
W
8
Searching for a torque wrench
W
9
Lubricating hinges
V
10
Entering the same data in two systems
W
Why:
1, 2 and 9 change the aircraft in a way the customer needs.
3, 5, 7, 8 and 10 use time without changing the aircraft.
4 is waiting time. The sign-off itself must stay, but the wait for it is waste.
6 adds nothing the customer would pay for, but safety requires it, so it stays.
Q2 · Healthcare · SIPOC
Scenario: A fictional community hospital is drawing a SIPOC for a planned knee procedure, from GP referral to discharge.
Question: Which item belongs in the Inputs column?
Answer: B
Why:
A) The referring GP provides inputs (the referral), so the GP is a supplier. The GP also receives the discharge summary as a customer.
B) ✓ Test results go into the process and are used by it.
C) The discharge summary comes out of the process, so it's an output.
D) Surgery is a step in the process itself.
Q3 · Banking/Services · Lean or Six Sigma
Scenario: At a fictional retail bank, two problems slow down account opening:
Staff re-key every paper form into the core system.
About 8% of applications fail ID matching, and the failures come from inconsistent data entry.
Question: Which pairing fits best?
Answer: C
Why:
A) Working with data doesn't make something a Six Sigma problem. Re-keying is a duplicated step, which is waste to remove.
B) This is the wrong way round. Lean removes steps like re-keying, and Six Sigma reduces the variation behind the failures.
C) ✓ Lean asks why this is slow; Six Sigma asks why it's different every time.
D) The ID check must stay, but the failures and the re-keying around it can still be improved.
Q4 · Manufacturing · Transfer question
Scenario: On a fictional steel-bracket line, the steps are cut → bend → weld → paint → pack. Welded brackets sit for about 9 days before they're painted, and nothing happens to them in that time. The customer is an equipment assembler.
Question: How should the 9 days between welding and paint be classified?
Answer: C
Why:
A) Painting adds value, but the wait before it doesn't.
B) A short cooling time could be required. Nine days isn't, and the scenario says nothing happens to the brackets.
C) ✓ Time that doesn't change the product is waste. Lean would aim to shorten it.
D) The welded brackets are the input to painting, not the waiting time.
Why this transfers: manufacturing isn't one of the video's examples, and the scenario explains every step, so a learner who understands value and waste can answer without knowing fabrication.
Q5 · Written answer · Lean and Six Sigma
Question: In three to five sentences, explain how Lean and Six Sigma differ, and how they work together. Name at least two differences.
Rubric (pass at 3 of 4 points):
Lean focuses on flow and speed by removing waste (non-value-adding steps, waiting).
Six Sigma focuses on consistency by using data to reduce variation and defects.
A second difference is named. For example, the question each asks (slow vs different every time), its origin (car assembly lines vs a data-driven quality method), or its typical tools.
It explains how they complement each other: Lean speeds the flow, Six Sigma makes the result reliable, and most teams use both.
Model answer: Lean improves flow by removing waste, such as waiting and duplicated steps, so work moves faster. Six Sigma uses data to reduce variation, so results are consistent and defects are rare. Lean asks "why is this slow?", while Six Sigma asks "why is this different every time?". They work best together: Lean clears the path, and Six Sigma makes what flows along it reliable.
All examples are fictional.
Cookies on InLine Ops. We'd like to use optional analytics cookies to see how the site is used and improve it. They're only set if you accept. Read more about cookies
ACADEMY · IN PRODUCTION
The Academy opens soon
We use your email only to tell you about this. See our Privacy Policy.